Stream Property Table - Property List
A property list identifies the properties that will be displayed in the stream property table. The property lists are created/modified using the Property List command from the options menu. PRO/II provides the following standard property lists:
Material Balance List:
Contains the overall stream temperature, pressure, weight flowrate, phase, and the stream composition on a weight basis.
Short Property List:
Contains only the overall stream properties (temperature, pressure, weight flowrate, phase and thermodynamic system).
Stream Summary List:
Contains the phase, molar flowrate, standard liquid flowrate, adjusted standard liquid flowrate, adjusted standard vapor flowrate, temperature, pressure, molecular weight, enthalpy, specific enthalpy, mole fraction liquid, reduced temperature, reduced pressure, acentric factor, UOP K-value, standard liquid density, adjusted standard liquid density, vapor and liquid molar flow rate, vapor and liquid mass flowrate, vapor and liquid volumetric flowrate, vapor adjusted standard volume rate, liquid adjusted standard volume rate, vapor and liquid molecular weight, vapor and liquid specific enthalpy, vapor and liquid CP, vapor and liquid density, vapor and liquid viscosity, vapor and liquid thermal conductivity, and liquid surface tension.
Dry Stream Summary list:
Similar to the Stream Summary list but ignoring water in the stream.
Component Molar Rates List:
Contains the molar component and total flow rates, Temperature, Pressure, Enthalpy, Molecular weight, Mole fraction vapor and liquid.
Property Label list:
Contains the temperature, pressure, and flowrate of the total stream.
Gas Report list:
Contains the temperature, pressure, weight rate, molar rate, enthalpy of the total stream. Molar rate, weight rate, actual volumetric rate, standard vapor volumetric rate, C2+, C3+, enthalpy, CP, CV, CP/CV ratio, entropy, ideal GHV, ideal LHV, Wobbe index*, molecular weight, actual density, compressibility, pseudo-critical temperature, pseudo-critical pressure, viscosity, and thermal conductivity of the dry vapor. Also, the molar weight, weight rate, actual liquid volume rate, standard liquid volume rate, enthalpy, CP, molecular weight, actual density, standard specific gravity, viscosity, and thermal conductivity of the dry liquid is included.
* Wobbe Index = GHV/(spgr)0.5
Chemical Report list:
Contains the phase, temperature, pressure, molar rate, weight rate, enthalpy, molecular weight, mole fraction liquid, weight fraction liquid, pseudo-critical temperature, pseudo-critical pressure of the total stream. For the vapor, the weight rate, the actual volumetric rate, the standard vapor volumetric rate, CP, CV, molecular weight, density, compressibility, vapor viscosity, and thermal conductivity. For the liquid, weight rate, actual liquid volume rate, standard liquid volume rate, CP, molecular weight, density, viscosity, and thermal conductivity.
Dry Refinery Report list:
Contains the phase, temperature, pressure, molar rate, weight rate, enthalpy, molecular weight, Watson K, flash point, RVP, TVP, standard API gravity for the total dry stream. For the dry vapor, weight rate, actual vapor volume rate, standard vapor volume rate, CP, CV, molecular weight, actual density, compressibility, standard specific gravity, viscosity. For the dry liquid, weight rate, actual liquid volume rate, standard liquid volume rate, CP, molecular weight, actual density, standard API gravity, and viscosity.
Wet Refinery Report list:
Similar to the Dry Refinery Report, but including the water in the streams.
Free Water Properties list:
Contains the molar fraction, weight fraction, and LV fraction for total water, decant water, and dissolved water in the stream.
Component Weight Rates:
Contains the total mass and weight component rates, temperature, pressure, enthalpy, molecular weight, weight fraction for vapor and liquid.
Molar Conc Report
Contains the component molar concentrations.
Mass Conc Report
Contains the component mass concentrations.
Usage
Select the property list that you want to use from the list box. The stream property table will then display all the stream data for the properties contained in this list. If stream composition properties are included in the selected list, the data for all the components in the stream will be displayed. However, instead of displaying all the components you can create groups and display the values for the group as a whole. See Stream Property Table Component Groups for more details.
Related Topics
Stream Property Table Main Window