Unit Operation Output Report Options
You can obtain a printout of additional results of unit operations like flash drums, columns, heat exchangers, crystallizers and dissolvers. This window is used to select the desired unit operations and select the properties to be printed through additional windows.
Usage
From the Report Format command in the Output menu, select Unit Operations item to display this window.
The Unit Operations list displays all the units in the calculation sequence for the simulation which can produce additional output. To select the properties to be printed for a unit, select the desired unit and push the Print Options button. The appropriate window for the selected unit operation will be displayed where you can select the properties to be printed for that unit. Continue this operation for all the desired units.
Note that there is no Cancel button in this window. Hence, you cannot cancel the report selections made for the units from this window. If you wish to cancel the selections, you must revisit each unit and remove the selections.