Refer to Case Study Overview for a description of Case Study and the meanings of terms used.
Use this window
to select a unit Parameter you want to change in Case Study.
to select a unit parameter you want to use when defining a Case Study Result.
The parameters available for selection depend on whether you are defining a Case Study Parameter or Result. The data entry windows guide you through the required entries by making them available as you make the appropriate selections.
Select a parameter or parameter category from the Parameter list box. Where necessary, make a further selection in the second list box.
If you have selected Component Flowrates or Composition you must select the Starting Component and Ending Component from the lists. The Ending Component defaults to the Starting Component.
For volume, flowrate and composition parameters you must select a Basis from the list.
Distillation Curve properties require a selection of Volume Percent Distillate.
For some stream physical properties you must supply a Reference Temperature.
When you return back to the Case Study Parameter Window , the parameter will be displayed in place of the original Parameter... text.
This window is opened by selecting a unit on the Case Study Parameter Window and clicking on Parameter....