Stream Property Report Options
This window is used to select the stream information that is to be printed in the output report. You can request the stream information to be printed in standard format, including TBP and ASTM distillation reports.
Usage
From the "Report Format" command in the Output menu, select the "Stream Properties" item to display this window.
Standard Component Flowrate and Composition
You can request that the stream compositions and component flowrates to be printed by selecting the appropriate options. The composition can be printed using both fraction and percent bases.
Flowrate, Fraction, Percent
Select the composition values that must be printed by checking the desired choices. All three types of data can be reported in mole, weight, liquid volume and gas volume basis. If more than one choice is selected for each category, multiple reports are generated.
Include Total (Wet) Liquid Volume Report if Decant water is On
This option prints the total standard liquid volume rate, fraction, percentage reports for all the streams on Wet basis.
Include Mole Concentration
This option prints the molar concentration of the components for all the streams.
Include Mass Concentration
This option prints the weight concentration of the components for all the streams.
Include Polymer Pseudocomponent Flowrates
This option prints the flow rates of the pseudo components for all the streams.
Include Water-Free Compositions
This option prints the water-free flow rates and composition for all the streams.
Include Adjusted Standard Flowrates
This option prints the adjusted flow rates and densities for all the streams.
Standard Stream Physical Property Summary
This option prints the physical stream property report, which contains both the total stream property and individual stream phases data. If VLE Thermodynamic Method has been selected and water is present in the stream, the total stream, liquid and vapor properties on a dry basis are also printed. A partial list of physical properties that are reported include molecular weight, overall enthalpy, liquid fraction, reduced properties, density, acentric factor.
TBP and ASTM Distillation Reports for All Appropriate Streams
Prints the TBP and ASTM distillation reports for all appropriate streams. Press the “Enter Points” button to provide the percent distilled data points at which the TBP and ASTM distillation reports data has to be printed.
Stream Property Tables in the Report
This option allows the user to print the Stream Property Table in the Output Report same as Stream Report Writer using the Keyword. If the Global check box is OFF, then the Stream Property Table cannot be viewed in the Output Report irrespective of whether the local check box in the Stream Property Table is ON/OFF. However, if the Global check box is ON then the Local check box in Stream Property Table will take precedence. Hence, the user can view the Stream Property Table in the Output Report only when both the Global and Local check boxes are ON. By default both the Global and Local check boxes are ON.
Kinematic Viscosity Output Sampling Points for Temperature
This option allows the user to specify the temperature values that will be used for calculating the kinematic viscosity data displayed in the output reports.