LNG Heat Exchanger - Cell Data
Use this window to allocate phases to multiple products or to change the default pressure drop and/or thermodynamic method. If the cell has more than one product stream, their phases must be defined.
Usage
Feed Streams:
The feed streams to the cell are displayed for information. Each cell may have any number of feed streams. If there is more than one feed stream, the feeds are mixed and flashed at the lowest feed stream pressure.
Product Phases:
If there is more than one product stream leaving the cell, the Product Phases button becomes available. Push this button to display the Product Phases Window where you enter the phase conditions of the product streams.
Pressure Drop:
You may enter a pressure drop across the cell. The default is zero pressure drop.
Thermodynamic System:
You may change the thermodynamic system for this cell from the default selected on the LNG Heat Exchanger Main Window. Select from the drop down list of systems defined in the Thermodynamic Data Window.
How to get to this window
The LNG Heat Exchanger - Cell Data window is accessed by pushing the Cell Data button on the LNG Heat Exchanger Main Window.