Rigorous Heat Exchanger - Nozzle Data
Use this window to specify nozzle type and sizes. All the data items in this window have default values.
Usage
Use Tubeside Nozzles
Check this box to request calculation of nozzle pressure drop for the tube side of the exchanger.
Tubeside Nozzles
Enter the inlet and outlet tubeside nozzle diameters. You must enter either both or neither. Enter the number of nozzles at inlet and outlet. You cannot enter these data unless the Use Tubeside Nozzles option is checked.
Use Shellside Nozzles
Check this box to request calculation of nozzle pressure drop for the shell side of the exchanger.
Shellside Nozzles
Enter the inlet and outlet shellside nozzle diameters. You must enter either both or neither. Enter the number of nozzles at inlet and outlet. You cannot enter these data unless the Use Shellside Nozzles option is checked.
Use Annular Shellside Nozzles
Check this box to specify Annular shell side nozzles. Then push the Enter Data... button to open the Annular Nozzle Data Window.
If this option is not checked and the Use Shellside Nozzles option is checked, PRO/II will assume that the shellside nozzles are standard (not annular).
How to get to this window
The Nozzle Data window is accessed by pushing the Nozzles... button on the Rigorous Heat Exchanger Window.