Use this window to change the operating conditions of the dissolver.
By default, the dissolver operates at the combined feed temperature and pressure.
The pressure may be specified as a drop below the combined feed pressure or you may specify the pressure value directly.
You may enter a thermal specification as a Temperature Change from the combined feed temperature or you may specify the operating Temperature or the Duty of the exchanger.
Alternatively, instead of entering a numeric value for the parameters in this window, they may be referenced using the Define system relative to any available unit operation or stream parameter calculated elsewhere in the simulation. See Dissolver Parameters available for Cross-Referencing for more details.
The Dissolver Operating Conditions window is accessed by pressing the Operating Conditions button on the Dissolver Main Window .
Related Topics