Unit Reaction Definitions
Use this window to view the reaction stoichiometry for the conversion reactor. You may also modify (DEFINE) the stoichiometry for the first reaction.
Usage
All the reactions are shown for your information. You may modify (DEFINE) the stoichiometric coefficients for the first reaction only for this reactor. All other reaction data are defined and modified in the Reaction Data Sets Window.
To change (i.e. DEFINE) the stoichiometric coefficients for the first reaction, you must first set the required values for all components in the simulation into successive positions in the results array of a Calculator unit. Components which do not appear in the reaction should have coefficient values set to zero.
Then check the Define the stoichiometry for the first reaction box on this window and select the required Calculator unit and the position in the results array of the first component coefficient value from the drop down lists.
How to get to this window
The Unit Reaction Definitions window is accessed by pressing the Unit Reaction Definitions button on the Conversion Reactor Main Window.