Define draw streams from the BATCHFRAC unit during its operation. Draws may be taken from any stage in the unit to a specified accumulator. Multiple draws are allowed in any policy segment.
Usage
Draw continuously from any stage into an accumulator during the simulation of any policy. Draws can be both in Liquid or Vapor phase at any specified rate and any specified stage (2 to N).
Draw to Accumulator
Select the Accumulator to use for this draw. The stream names used are already associated to the Accumulator in the Product DEW.
Draw Phase
You can select either Liquid or Vapor phase to be drawn from any stage. You can associate 2 draw streams for any one stage.
Draw Rate
The draw continues at the specified rate until the end of the policy segment.
To change the dimensional units displayed for entries, press the UOM button to view and use the Unit of Measure Selection Window.
How to get to this window
The BATCHFRAC - Draw Specification window is accessed by selecting Draw in the Action/Condition table in the BATCHFRAC - Policy Segment window and then clicking on the linked text under Description.
Related Topics
BATCHFRAC ® is a registered trademark of Koch-Glitsch, LP